23
Setting or changing the start delay
Using the start delay timer you can adjust when
within the next 19 hours the dishwashing cycle is to
begin.
Setting the start delay:
1. Press the ON/OFF button.
2. Continue pressing the start delay button
ñ until
the number of hours until the dishwashing cycle is
to start is flashing in the multi-display.
3. Press the button for the desired dishwashing
cycle.
The length of the selected dishwashing cycle will
flash for a moment in the multi-display, and then
the selected starting time will be displayed again.
As soon as the number of hours is displayed with-
out flashing, the start delay has been activated.
The dishwashing cycle will start automatically fol-
lowing a countdown of the hours set.
Changing the start delay:
As long as the dishwashing cycle has not started, you
are still able to cancel the start delay by pressing the
start delay button
ñ .
Cancelling the start delay:
As long as the dishwashing cycle has not started you
are still able to cancel the start delay. Continue
pressing the start delay button
ñ until the length of
the selected dishwashing cycle appears in the multi-
display. The selected dishwashing cycle will begin
immediately.
Changing the dishwashing cycle after the
start delay has been set:
As long as the dishwashing cycle has not started, you
are still able to change the start delay set by pressing
a cycle button.
1. Press the button for the new dishwashing cycle
and hold it down.
First, the indicator for the dishwashing cycle that
has just been selected will flash.
After several seconds only the indicator for the
new dishwashing cycle will be flashing.
2. Release the cycle button.
The newly selected dishwashing cycle will start
automatically following a countdown of the hours
set.
To Next Page
Loading...
