EasyManua.ls Logo

Electrolux ESL5205LO - Programmes and Settings; Programme Details and User Settings

Electrolux ESL5205LO
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Programme Degree of soil
Type of load
Programme
phases
Consumption values
1)
Duration
(min)
Energy
(kWh)
Water
(l)
Normal soil
Crockery and
cutlery
Pre-wash
Wash 65 °C
Rinses
Dry
130 - 140 1.4 - 1.6 15-17
3)
Fresh soil
Crockery and
cutlery
Wash 60 °C
or 65 °C
Rinses
30 0.8 10
4)
All Pre-wash 14 0.1 5
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
2)
With this programme you have the most efficient use of water and energy consumption
for crockery and cutlery with normal soil. (Also, it is a standard programme for test insti‐
tutes).
3)
With this programme you can wash a load with fresh soil. It gives good washing results in
a short period of time.
4)
Use this programme to quickly rinse the dishes and to prevent the food remains from dry‐
ing out on the dishes and to reduce bad odour coming out from the appliance. Do not use
detergent with this programme.
5.1 Information for test
institutes
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
6. SETTINGS
6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
The level of water softener according
to the water hardness.
Activation or deactivation of the
acoustic signal for the end of a
programme.
Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
flashes.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold the programme button
until the appliance is in programme
selection mode.
ENGLISH 7

Related product manuals