EasyManua.ls Logo

Electrolux ESL68040 - Unloading the Dishwasher; Washing Programmes

Electrolux ESL68040
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Close the dishwasher door; the pro-
gramme will continue from the point at
which it was interrupted.
End of the washing programme
The dishwasher will automatically
stop and an audible signal informs you
of the end of the washing programme.
When the programme has ended, the
optical signal on the floor beneath the
dishwasher door will turn off.
1. Open the dishwasher door.
The messages PROGRAMME
END alternated with PLEASE
SWITCH OFF appear on the dis-
play.
2. 2. Press the On/Off button.
Leave the door ajar and wait a few
minutes before removing the
dishes; this way they will be cooler
and the drying will be improved
Unloading the dishwasher
Hot dishes are sensitive to knocks.
The dishes should therefore be al-
lowed to cool down before removing
from the appliance.
Empty the lower basket first and then
the upper one; this will avoid water
dripping from the upper basket onto
the dishes in the lower one.
Water may appear on the sides and
the door of the dishwasher as the
stainless steel will eventually become
cooler than the dishes.
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the
water tap turned off.
Washing programmes
Programme
Degree of
soil
Type of load Programme description
70° Intensive Heavy soil
Crockery, cut-
lery, pots and
pans
Prewash
Main wash up to 70°C
1 or 2 intermediate rinses
Final rinse
Drying
24 electrolux unloading the dishwasher

Related product manuals