Why is no water entering my Electrolux EUCA060 Dishwasher?
If your Electrolux Dishwasher isn't getting water, the first thing to check is the tap. Make sure it's fully open. If the tap is open, the water inlet filter might be clogged, so try cleaning it. Also, ensure that the overflow is properly inserted, especially if your appliance doesn't have a drain pump. Finally, check that the mains pressure isn't too low.
What to do if my Electrolux Dishwasher has inefficient drainage?
If your Electrolux Dishwasher is experiencing inefficient drainage, it might be due to an obstruction in the waste outlet pipe or the overflow aperture. Clear any blockages you find there. Also, make sure that the overflow is removed.
How to fix a tank water level that is too high in my Electrolux EUCA060?
If the tank water level in your Electrolux Dishwasher is too high, it's likely that the waste outlet pipe or the overflow aperture is obstructed. Clear any obstructions from these areas to resolve the issue.
General| Place settings | 6 |
|---|---|
| Energy rating | A |
| Programs | 6 |
| Delay start | Yes |
| Dimensions (HxWxD) | 500 mm |
Lists and explains error codes and anomalies displayed by the dishwasher and their causes.
Explains symbols used in the manual to identify hazards and provides general safety guidelines for safe operation.
Outlines essential safety rules for operating the appliance, including user responsibilities and prohibitions.
Details the necessary protective gear for operators during different stages of the machine's service life.
Basic precautions to reduce risks of fire, electric shock, or injury specific to the USA market.
Highlights the importance of safety devices and warns against their removal or tampering.
Describes the machine's mechanical safety characteristics and potential hazards related to moving parts.
Details the guards and safety devices integrated into the machine to protect users and the appliance.
Explains the meaning of prohibition and warning signs found on or near the machine.
Provides instructions for safe use and maintenance, highlighting risks and precautions for operations on moving parts.
Provides step-by-step instructions for starting the dishwasher, including initial setup and power-on procedures.
Explains the general operation procedure, including pre-wash cycles, selecting wash cycles, and loading racks.
Details the different wash cycles, their recommended uses, and provides tables for cycle times.
Provides a table of common anomalies, their possible causes, and recommended actions for resolution.
Lists and explains error codes and anomalies displayed by the dishwasher and their causes.
To Next Page
