35
How to manage error codes
When the software error occurs, the display shows error message. In this section, you will find the list of the
problems that you can handle on your own.
Code and description
Remedy
C2
–
the Food sensor/probe is in the oven cavity
during Pyrolytic Cleaning.
Take out the Food sensor/probe.
C3
–
the door is not fully closed during Pyrolytic
Cleaning.
Close the door.
F111 – Food sensor/probe is not correctly inserted
into the socket.
Fully plug Food sensor/probe into the socket.
F240, F439 – the touch fields on the display do
not work properly.
Clean the surface of the display with micro fibre cloth. Make
sure there is no dirt on the touch fields.
F908, F113 – the oven system cannot connect
with the control panel.
Turn power OFF and ON.
When one of these error messages continues to appear, please contact the Customer Care Centre using details on
the back cover of this user manual.
To Next Page
