12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 What to do if...
Problem Check if...
You cannot activate or operate the appliance. The appliance is correctly connected to an electrical
supply.
The appliance does not heat up. The automatic switch-off is deactivated.
The appliance does not heat up. The fuse is not blown.
The appliance does not heat up. Lock is deactivated.
The lamp does not work. The lamp is burnt out. Contact an Authorised Service
Centre.
The turntable set makes noise. There is food residue below the turntable set.
The display shows 00:00. There was a power cut. Set the time of day.
If the display shows an error code that is
not in this table, turn the house fuse off
and on to restart the appliance. If the
error code recurs contact an Authorised
Service Centre.
12.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is located
on the front frame of the appliance. It is
visible when you open the door. Do not
remove the rating plate from the appliance.
We recommend that you write the data
here:
Model (MOD.) :
Product number (PNC):
Serial number (S.N.):
13. ENERGY EFFICIENCY
13.1 Product Information for power consumption and maximum time to
reach applicable low power mode
Power consumption in standby 0.8 W
Maximum time needed for the equipment to automatically reach the applicable low power mode 20 min
13.2 Energy saving tips
Following tips below will help you save
energy when using your appliance.
Make sure that the appliance door is closed
when the appliance operates. Do not open
the appliance door too often during cooking.
ENGLISH 17
To Next Page
Loading...
