23
Storage Features
CAUTION
To avoid injury from breakage, handle tempered
glass shelves carefully.
NOTE
Features may vary according to model.
Shelf features
To change the position of a shelf:
1 Remove shelf from its locked position by pulling
the slide mechanism toward you.
3 Place top hooks of the hanger into the desired
slot, and lower straight down until lower hooks
rest on the ladder.
4 Relock shelf by pushing the slide mechanism
away from you.
6 Gently set the shelf onto the hanger once the
back is secured by the hanger.
CAUTION
Shelves must be removed prior to moving the
refrigerator.
5 While holding shelf at a 45-degree angle with the
gray handle facing you, push the shelf into the
back of the hanger.
2 Lift the hanger directly upwards and pull toward
you to remove it from the ladder.
To Next Page
Loading...
