_llnstall Anti-tip Mounting
the Screws
The wall oven can tip when the door is
open. The anti-tip mounting screws supplied with the
wall oven must be installed to prevent tipping of the
wall oven and injury to persons.
A. The mounting holes in the side trims may be
used as a template to locate the appliance mounting
screw holes (see figure 6).
B. Use the two screws supplied to fix the appliance
to the cabinet.
Anti-Tip Mounting Holes
Figure 6
_1 Install the Bottom Trim
IMPORTANT: Bottom trim must be installed for the
oven to function properly. DO NOT operate the oven
without the bottom oven trim installed.
Place the top of the bottom trim over the side trim
tabs on each side of the oven below the oven door
and fix it using the 2 screws supplied in the mounting
holes located on each side trim below the oven
frame (see Figure 7).
Tip Over Hazar_
- A child or adult can tip the oven
and be killed.
- install the anti-tip device to oven
and/or structure per installation
instructions.
- Ensure the anti-tip device is re-engaged when the
oven is moved.
- Do not operate the oven without the anti-tip device
in place and engaged.
-Faiiure to follow these instructions can result in
death or serious burns to children and adults.
Anti-tip mounting holes
Refer to the installation
instructions supplied with your
appliance for proper installa-
tion.
Check for proper installation
with a visual check that the
anti-tip screws are present.
Test the installation with light
downward pressure on the
open oven door. The oven
should not tip forward.
Screws
supplied
-- Bottom Trim
Figure 7
6
To Next Page
Loading...
