What to do if the Electrolux EW30DF65GB EOC does not respond when the TST panel is touched?
If the EOC (Electronic Oven Control) of your Electrolux Oven doesn't respond when the TST (Touch Screen Technology) panel is touched, the cause may be a defective EOC or TST panel. It's suggested to first replace the EOC. If the problem persists, then replace the TST panel assembly.
How to fix Electrolux Oven TST control panel that does not operate and generates a fault code?
If the TST control panel of your Electrolux Oven does not operate and generates a fault code, inspect and re-seat the ribbon connectors. If a failure/fault code is present, follow the diagnostic procedure for that code.
Why is only one key on my Electrolux EW30DF65GB TST panel non responsive?
If only a single key on the TST panel of your Electrolux Oven is non-responsive, the TST panel is the most likely cause of failure.
General| Brand | Electrolux |
|---|---|
| Model | EW30DF65GB |
| Product Type | Oven |
| Fuel Type | Electric |
| Self-Cleaning | Yes |
| Convection Cooking | Yes |
| Width | 30 inches |
| Voltage | 240 V |
| Control Type | Electronic |
| Cooking Modes | Convection Bake, Convection Roast, Broil, Bake |
| Number of Oven Racks | 3 |
Essential safety practices for appliance repair technicians.
Advice on effective troubleshooting and work habits for technicians.
Listing and description of necessary tools for Electrolux appliance repair.
Limits for surface temperatures on gas and electric ranges.
Chart correlating oven temperature sensor resistance values.
Resistance values for various dual fuel range components.
Matrices for analyzing relay board circuits and EOC signal voltage.
Details on VSC and Power Supply boards for EOC.
Glossary of terms and abbreviations used in the manual.
Electrical schematic for Dual Fuel Wave Touch models with lower oven.
Wiring diagram for Dual Fuel Wave Touch models with lower oven.
Troubleshooting steps for ES630 electronic oven control fault codes.
Operation and troubleshooting of the TST control panel.
Procedure to enter and utilize the range's diagnostic service mode.
Overview of the ES630 Electronic Oven Control system and its interface.
Testing procedures for the EOC and its power supply board.
Using the signal voltage matrix to test EOC to relay board communication.
How the VSC board controls convection fan speed.
Operation and troubleshooting of the interior oven lighting system.
How the rack sensing switch works and common issues.
Detailed steps for testing the rack sensing switch.
How the meat probe works and how to troubleshoot it.
General features and LP gas conversion information for the range.
Step-by-step guide to remove and disassemble the oven door.
Procedures for replacing door panels, glass, and hinges.
Steps to remove the cooktop, burners, and manifold panel.
Replacing ignitor switches, harnesses, and burner valves.
Service for oven racks, sensor assembly, and elements.
Procedures for replacing halogen oven light bulbs and assemblies.
Steps to replace lower oven elements, probes, and thermal cutouts.
Procedures for replacing drawer glides, seals, and chassis.
To Next Page
