Electrolux EWF 12821 - Program Selection and Control Panel Options; Selecting a Washing Program

8 electrolux use
Select the required program
Attention!
Program Option buttons
Turn the program selector dial to the
required program. The buzzer sounds.
The washing machine will propose a
temperature and automatically select
the maximum spin value provided for
the program you have chosen. You can
change these values by operating the
corresponding buttons. The Display
shows the following information about
the selected program proposed:
Depending on the program, different
functions can be combined. These must
be selected after choosing the desired
program and before depressing the
Start/Pause button.
The selector dial is divided into following
sections:
The selector dial can be turned either
clockwise or anticlockwise. Position “O”
to Reset program / Switching OFF the
machine.
If you turn the program selector dial to
another program when the machine is
working, the red Start/Pause pilot light
will flash 3 times and the message “Err”
will appear on the display to indicate a
wrong selection. The machine will not
perform the new selected program.
At the end of the program the selector
dial must be turned to position “O”, to
switch the machine off.
Cottons , Synthetics ,
Delicates
Sensitive Plus , Easy Iron
Spin , Drain , Rinse
Silk , Hand Wash ,
Woollens , Quick ,
Bedding , Cottons Eco
Temperature
Spin speed
phase icons making up the program
3
Soil degree
4
duration
5
1
2
The green Start/Pause light starts to
flash.
1 2 3
4
5