12
www.electrolux.com
DAILY USE5.
Step 1 - Setting A Program For Washing
Connect the mains plug to the mains socket.
5.1 4 Steps Start Up Guide
Turn the water tap on.
1.
Press the On/Off button to turn on the
washing machine.
2.
Turn the program selector dial
to the required program.
The relevant light will light up.
-
The buzzer will sound.
-
Once you selected a wash
program, the program selected
will stay at that position for the
whole of the wash.
-
The selector dial can be
turned either clockwise or
anticlockwise.
-
The display shows the level of
the Time Manager, the
program duration and the
indicators of the phases of the
program.
-
BEFORE FIRST USE4.
Ensure that the electrical and water
connections comply with the
installation instructions.
Put 2 litres of water in the detergent
compartment for washing phase.
This activates the drain system.
1.
2.
3.
Select a Cottons cycle at 90 °C,
without any laundry in the machine,
to remove any manufacturing residue
from the drum and tub then start the
machine.
1
3
5
4
2
To Next Page
Loading...
