What to do if there is water on the floor near my Electrolux EWF12942?
If you find water on the floor near your Electrolux Washer, it could be due to using too much or unsuitable detergent, leaks from the inlet hose fittings, or a damaged drain hose. Try reducing the amount or changing the type of detergent you use. Check the water inlet hose connection and replace the drain hose if it's damaged.
Why is my Electrolux EWF12942 Washer vibrating or noisy?
If your Electrolux Washer is vibrating or noisy, it might be because the transit bolts and packing haven't been removed, the support feet haven't been adjusted, the laundry isn't evenly distributed in the drum, or there's very little laundry in the drum. Check the installation, ensure the appliance is correctly leveled, redistribute the laundry manually, or load more laundry.
What to do if Electrolux EWF12942 fills and empties water right away?
If your Electrolux Washer fills with water and then empties it immediately, the end of the drain hose might be too low, the drain hose could be squashed or kinked, the drain pump might be clogged, or the ‘Rinse Hold’ or ‘No Spin’ option has been selected. Check the drain hose connection, clean the drain filter, or press Start/Pause to drain the water and select a spin program.
Why does my Electrolux EWF12942 make an unusual noise?
An unusual noise from your Electrolux Washer could be due to improper installation, transit bolts or packaging not removed, or the load being too small. Make sure the leveling of the appliance is correct, ensure that the packaging and/or the transit bolts are removed, or add more laundry in the drum.
What to do if Electrolux Washer cycle time is longer than displayed?
If the cycle time on your Electrolux Washer is longer than displayed, it could be due to detergent overdose. Try reducing the amount of detergent or using a different type. Machine unbalance can also cause this; redistribute the laundry manually in the drum and start the spin phase again.
Why does the spinning start late or the Electrolux EWF12942 Washer does not spin?
Spinning might start late or the Electrolux Washer might not spin because the electronic unbalance detection device has activated due to unevenly distributed laundry in the drum. Pause the machine and redistribute the laundry manually.
General| Load Capacity | 9 kg |
|---|---|
| Spin Speed | 1200 rpm |
| Energy Rating | A+++ |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Water Consumption | 54 L/cycle |
| Colour | White |
| Washing capacity | 9 kg |
| Type | Freestanding |
| Loading type | Front |
Covers general safety rules and warnings for appliance operation.
Safety precautions specifically for the installation process of the washing machine.
Instructions for correct and safe domestic use of the appliance.
Measures and warnings to ensure child safety around the washing machine.
Explanation of the child lock feature for preventing unauthorized use.
Comprehensive table detailing wash programs, load capacities, and available options.
Procedures for properly loading laundry into the drum and preparing it for washing.
How to correctly use the detergent dispenser compartments for detergent and additives.
Further details on detergent placement and usage for different compartments.
Instructions on how to start the selected wash program and interpret the display.
Guide to activating and deactivating the Child Lock to prevent misuse.
Instructions for cleaning the drain pump and filter to ensure proper drainage.
Guidelines for placing the machine on a level surface for optimal performance.
Steps for connecting the water inlet hose to the water supply.
Options and requirements for setting up the water drain hose.
Instructions and safety notes for connecting the appliance to the electrical power supply.
To Next Page