12
www.electrolux.com
BEFORE FIRST USE4.
Ensure that the electrical and water
connections comply with the
installation instructions.
Put 2 litres of water in the
detergent compartment for
washing phase. This activates
the drain system.
1.
2.
3.
Select a Regular cycle at 90 °C,
without any laundry in the machine,
to remove any manufacturing residue
from the drum and tub. Pour 1/2 a
measure of detergent into the
dispenser drawer and start the
machine.
DAILY USE5.
Step 1 - Setting A Program For Washing
5.1 Four Steps Start Up Guide
Connect the mains plug to the mains socket.
Turn the water tap on.
* model EWP85742 (for reference only)
1
2
3
4
1.
Turn the program selector dial to the
required program.
Once you select a wash program,
the program selected will stay at
that position for the whole of the
wash.
-
The selector dial can be turned
either clockwise or anticlockwise.
-
2.
If you want your laundry to be spun
or use temperature different from
the one proposed by the washing
machine, press the Spin ‘ ’ and
the temperature ‘ ’ touchpads
repeatedly to change the spin
speed and temperature.
To Next Page
Loading...
