Electrolux EWT113 - Error Codes and Recovery; Draining and Water Loss Problems; Error Codes and Machine Recovery

Draining problem
Loss of water,
while washing
Communication
error
Call Service.
Machine in pause
mode
Press Start/Hold To Pause.
E20
SP
Out of balance
interruption
Incorrect option
selection
Power down
recovery
Description Customer action (Summary)
Display Code
Make the machine level.
Adjust feet to touch the floor.
Wait, this fault may clear itself.
Choose the correct option.
Redistribute clothes evenly, then close the Lid to continue.
Turn off the washing machine and call Service.
Raise the top of drain hose above the join between
the top panel and the cabinet untill the water stop
flowing out of drain hose, replace to its position.
Press ‘Start/Hold To Pause’ to re-start wash.
If this problem is repeated, call Service.
28