To Next Page
D
deborah85Aug 3, 2025
What to do if my Electrolux Washer stops during delay or spin cycle?
- RroblesjeremyAug 3, 2025
The program should adjust and recover automatically. Ensure the lid is closed. If the machine is not working, it might be due to several reasons: * Too much water inflow exceeding the maximum level. * Abnormal water level. * The lid being opened during delay start or spin cycle. * The drain hose being placed too high, blocked, bent, or squashed. In this case, lower the drain hose and press Start/Pause. Also, check the drain hose for blockages and press Start/Pause to resume operation. * The lid is not closed with “Child Lock” option selected. Close the lid within 10 seconds and the machine will recover automatically. Note that if the lid isn't closed within 10 seconds, the washer will drain water automatically.
General
Weight and Dimensions
