Electrolux EWT121 - Page 29

Machine in pause
mode
Press Start/Hold To Pause.
SP
Out of balance
interruption
Incorrect option
selection
Power down
recovery
Draining problem
Loss of water,
while washing
Water level problem
Motor fault
Wait a few minutes to see if the fault is corrected.
If not, press ‘Start/Hold To Pause’ then check the
drain hose for blockage. Press ‘Start/Hold To Pause’
to continue the wash.
If problem remains, call Service.
If water level in wash bowl is low
and water is flooding the floor,
select program ‘Drain & Spin ’ position,
then press ‘Start/Hold To Pause’.
Otherwise, press ‘Start/Hold To Pause’ to continue
the wash
Wait, this fault may clear itself. If not,
then press ‘Start/Hold To Pause’ to drain
the wash bowl.
If this problem is repeated, call Service.
Wait, this fault may clear itself. If not,
position to drain the wash bowl.
You may have to press ‘Start/Hold To Pause’ to
commence draining.
If this problem is repeated, call Service.
E20
E30
E50
Description Customer action (Summary)
Display Code
Should this make things worse, press the power
switch and call Service.
select program ‘Drain & Spin ’ position,
select program ‘Drain & Spin ’ position,
Communication
error
Call Service.
ERR
PR
Make the machine level.
Adjust feet to touch the floor.
Wait, this fault may clear itself.
Choose the correct option.
Redistribute clothes evenly, then close the lid to continue.
29