Electrolux EWW1042AEWA User Manual

ENGLISH 21
Measure out the amount of
detergent required, pour it into the
main wash compartment .
Do not use gelatinous or thick
liquid detergents.
Do not put more liquid than the
maximum level.
Do not set the “Delay Start”.
Do not set the “Prewash” phase.
When you use the liquid
detergent
Pull out the dispenser drawer until
it stops.
−
−
−
−
−
−
Measure out the detergent and the
fabric softener;
2.
If you wish to carry out the
“Prewash” phase, pour it into the
compartment marked .
If required, pour fabric softener into
the compartment marked .
−
Close the drawer gently.
−
−
Residues of detergent, softener and
water may remain in the dispenser.
It is recommended to clean the
dispenser regularly to remove any
residue.
The softener amount used must not
exceed the “MAX” mark in the
drawer.
If you use thick softeners it is
recommended to dilute with water.
If you want your laundry to be spun or
use temperature different from the one
proposed by the Washer-Dryer, press
“Spin” and “Temp” touchpads
repeatedly to change the spin speed
and temperature.
Press the option touchpads, if you
want your laundry to be washed with
special functions.
Different functions can be combined
which is dependent on the program
selected.
If an option is not compatible with
the program selected, the symbol
“ ” will flash on display along
with buzzer sound.
If you want to delay the start of the
program, press the “Delay Start”
touchpad repeatedly to choose your
Washer-Dryer delay time.
5.3 Options Setting
−
−
1.
2.
NOTE
NOTE
NOTE

Electrolux EWW1042AEWA Specifications

General

Brand	Electrolux
Model	EWW1042AEWA
Category	Washer/Dryer
Language	English