36 www.electrolux.com
8.
9.
Pull out the plastic spacers.
10.
Put the plastic caps in the holes.
You can find these caps in the user
manual bag.
Remove the three transit bolts.
A
1
2
3
Loosen or tighten the feet to adjust
the level. A correct adjustment of
the appliance level prevents
vibration, noise and the movement
of the appliance when in operation.
13.2 Positioning
Use a spirit level on the top and
side of the washer-dryer to check
the levels.
If you do not have a spirit level, as
a guide use the edge of a door
frame, cupboard or bench to
check that the washer-dryer is
leveled.
It is important that your washer-
dryer stands firm and leveled on
the floor to ensure correct
operation. The appliance must not
be installed behind a lockable
door, a sliding door or a door with
a hinge on the opposite side to
avoid restricting the washer-dryer
door.
To Next Page
Loading...
