Electrolux EX601SC - Control Panel Functions

Control panel
1. On/Off button
2. Digital display
3. Programme selection buttons
4. Delay start button
5. Indicator lights
6. Function buttons
Indicator lights
Tablet function Indicates the activa-
tion/deactivation of the
'Tablet function' (refer
to 'Tablet function' ).
Rinse aid
1)
Comes on when the
rinse aid has run out.
End Comes on when a
washing programme
has ended.
1) The rinse aid indicator light never comes on
while a washing programme is running even if
filling with rinse aid is necessary.
The digital display
The digital display indicates:
• the approximate remaining time of the run-
ning programme,
• activation/deactivation of the rinse aid dis-
penser ( ONLY with the 'Tablet function'
active),
• the end of a washing programme (the dig-
ital display shows a zero),
• the countdown for the delay start,
• fault codes concerning malfunction of the
dishwasher,
• if the audible signals are activated/deacti-
vated.
Function buttons
The following functions can be set using
these buttons:
• cancelling a washing programme or a de-
lay start in progress,
• activation/deactivation of the 'Tablet func-
tion',
• activation/deactivation of the rinse aid dis-
penser when the 'Tablet function' is active,
• activation/deactivation of the audible sig-
nals.
Setting mode
Press the On/Off button; if ALL programme
button lights are on, the appliance is in set-
ting mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– activating/deactivating the rinse aid,
– activating/deactivating the audible
signals,
the appliance MUST be in setting mode.
Press the On/Off button; if a programme but-
ton light is on, the last performed or selected
programme is still set. In this case, to return
to setting mode, the programme has to be
cancelled.
electrolux 5