User manual
11
5.4 Temperature setting
Select the temperature in function of the article to be ironed.
0 (zero) Heating off
0 to 50 °C
Tepid
50 to 100 °C
Nylon, etc...
100 to 150 °C
Silk, Wood
150 to 170 °C
Cotton, Linen, Polycotton
As soon as the yellow "heating on" indicator light goes off, ironing can commence.
5.5 Finger protection device
Check that the finger protection device is operating prior to each use.
When this device is activated, the ironing machine stops, the cylinder stops turning and the bed comes away.
Press on the control pedal to continue ironing.
Push gently on the control pedal with your foot.
When the pedal is in position 1 (rest position), the cylinder is stopped and the bed is in the rear position.
Press down then release the pedal a first time in position 2 or 3, the cylinder starts to turn and the bed advances to-
wards it.
A new action in position 3 stops the cylinder, the bed moves back allowing the ironing to be placed on the cylinder.
Again press down on the pedal in position 2, the bed advances, the cylinder turns, taking up the article being ironed.
To Next Page
Loading...
