Operating Instructions
23
HOT WATER FORTEA OR OTHER DRINKS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Z WARNING
BURNWARNING: HOT LIQUIDS CAN CAUSE SEVEREBURNS. KEEPALL
BODY PARTSAND CLOTHING CLEAR OFTHE BREWING COMPARTMENT
DURING OPERATION.
Use the Hot Water button to brew tea and other hot flavored drinks. The
coffee maker dispenses about four ounces of hot water at a time.
1. Put the proper amount of tea or mix for your hot drink into a cup or glass.
2. Using a hot pad, pull the hot water wand gently toward you, until it sticks out
at an angle.
3. Slip a cup or glass under the hot water wand.
,
.
Push the cup (or glass) and the hot water v_and gently back into the brewing
compartment. Rest the cup gently on the drip tray.
Push the Hot Water button. You will hear the water pump hum as hot water
is dispensed. Push the Hot Water button again to make the coffee maker
stop before the normal amount is dispensed.
6. If you want more hot water dispensed, wait until the display reads "Machine
Ready", then push the Hot Water button again.
7. When the display reads "Machine Ready", carefully remove the cup or
glass from the brewing compartment. Stir until the drink is properly mixed.
.
Wipe the steam/hot water wand with a soft dry cloth after you are finished
using it.
Hot
Water
To Next Page
Loading...
