Function Description
1
Hob²Hood Indicator of the function to control hood from hob.
2
Lamp Turns the lights on and off.
3
First speed / Off The motor switches to first speed level. Second press turns off the ap‐
pliance.
4
Second speed The motor switches to second speed level.
5
Third speed The motor switches to third speed level.
6
Maximum speed The motor switches to maximum speed level.
7
Filter notification Reminds to change or clean the charcoal filter and clean the grease
filter.
5. DAILY USE
5.1 Using the hood
Check the recommended speed according to
the table below.
While heating up food, cooking with covered pots.
While cooking with covered pots on multiple cooking zones or
burners, gentle frying.
While boiling, frying big quantities of food without a lid, cooking on
multiple cooking zones or burners.
While boiling, frying big quantities of food without a lid, big humidi‐
ty. The hood operates on maximum speed. After 6 minutes the ap‐
pliance returns to previous setting.
It is recommended to leave the hood
operating for approximately 15 minutes
after cooking.
To operate the hood:
1. Press the first speed button to switch
on the appliance.
2. If needed, press the light button to
illuminate the cooking surface.
3. If needed, change the speed by pressing
the desired button.
To turn off the appliance press the first speed
button
again.
5.2 Hob²Hood function
It is an automatic function which connects the
hob with a hood. Both the hob and the hood
have an infrared signal communicator. Speed
of the fan is defined automatically on basis of
mode setting and temperature of the hottest
cookware on the hob. You can also operate
the fan using the hob manually. The function
can be activated from panel of the hob.
For more information how to use the
function refer to the hob user manual.
55
To Next Page
Loading...
