To Next Page
B
barnesgeraldAug 18, 2025
What to do if the Electrolux LI17C lid does not open?
- WWilliam MillerAug 18, 2025
Wait a few minutes to allow the Electrolux Washer lid to release.
What to do if the Electrolux LI17C lid does not open?
Wait a few minutes to allow the Electrolux Washer lid to release.
What to do if the LED of the ON/OFF key is not ON in Electrolux LI17C Washer?
Press the ON/OFF key on your Electrolux Washer and wait for 5 seconds.
What to do if the Electrolux LI17C Washer has wrong voltage?
Check the correct voltage for your Electrolux Washer.
What to do if the drain hose of my Electrolux LI17C is too low?
Position the drain hose of your Electrolux Washer at a minimum height of 90 cm.
What to do if the Electrolux LI17C Washer inlet hose is folded or strangled?
Unfold or clear the Electrolux Washer's inlet hose if it's folded or strangled.
What to do if the Electrolux Washer is in the soaking step?
Please wait for the Electrolux Washer to complete the soak step.
What to do if the Electrolux LI17C Washer package base has not been removed?
Remove all package parts from the Electrolux Washer.
What should I do if the electrical circuit for my Electrolux Washer is in bad condition?
Check the electrical circuit connected to your Electrolux Washer. If necessary, call an electrician.
What to do if I used an adaptor or extension cord with my Electrolux LI17C Washer?
Do not use adaptors or extension cords with your Electrolux Washer; replace the socket instead.
What to do if I placed more than 20 cm of the drain hose in the drain outlet of my Electrolux LI17C Washer?
Place a maximum of 20 cm of the drain hose in the drain outlet of your Electrolux Washer.
General| Brand | Electrolux |
|---|---|
| Model | LI17C |
| Category | Washer |
| Language | English |
Retains lint from clothes during washing, requires cleaning after each cycle.
Addresses issues preventing the washing machine from starting or operating.
Explains slow or weak agitation during washing cycles.
Covers problems related to the machine not draining or spinning correctly.
Solutions for the machine filling and draining simultaneously.
Troubleshooting steps when water fails to enter the machine.
Reasons for clothes becoming stained during washing.
