Need help?Do you have a question about the Electrolux Front load washer and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | Front load washer |
| Category | Washer |
| Language | English |
Explains safety symbols like WARNING and CAUTION used in the manual.
Instructions for removing and storing shipping hardware from the washer.
Steps for ensuring the washer is level and stable on all four corners.
Requirements for connecting hot and cold water supply hoses.
Requirements for the drain system connection and hose placement.
Steps to follow for reversing the door swing direction.
Checks required for electrical power connection before operation.
Final checks to perform after installation and before use.
Lists the tools and materials required for the installation process.
Specifies water pressure and faucet connection requirements.
Details standpipe height, diameter, and drain capacity.
Explains proper grounding to prevent electrical shock.
Ventilation requirements for installing in a closet or recess.
Instructions for safely removing foam packaging and handling the washer.
Instructions for inserting hole plugs into the back panel.
Steps to properly level the washer for reduced noise and vibration.
Instructions for connecting hot and cold water hoses and checking for leaks.
Pre-requisites and safety precautions for door reversal.
Detailed steps for removing door components and hardware.
Steps to remove the door lock and its harness.
Instructions for reattaching the hinge to the front panel.
How to remove the latch indicator from the door.
Process for removing the hole plug from the door.
Steps for reattaching the striker plate with screws.
How to reinsert the hole plug into the opposite door hole.
Steps to reinstall the door onto the hinge locating pins.
Instructions for reversing the trim ring cover plate.
How to orient and install the trim ring onto the door.
Steps to install the trim plug with a screw.
Lists available accessories like pedestals and stacking kits.
Information on obtaining replacement parts and contact details.
To Next Page