Need help?Do you have a question about the Electrolux FLE220 and is the answer not in the manual?
General| Capacity | 7 kg |
|---|---|
| Energy Efficiency Class | A+++ |
| Spin Speed | 1200 rpm |
| Child Lock | Yes |
| Dimensions (H x W x D) | 85 x 60 x 54 cm |
| Programs | Cotton, Synthetics, Delicates, Wool |
| Delay Start | Yes |
Description of safety measures related to machine operation.
General technical data for the washing machines.
Specific technical data for the FLE MP FC variant.
Explanation of the card tracks and their functions.
Detailed description of the prewash cycle.
Detailed description of the main wash cycle.
Detailed description of the rinse cycles 1 to 3.
Detailed description of the rinse cycle 4.
Description of the programme completion phase.
Routine checks to be performed daily.
Tasks to be performed every three months.
Introduction to the machine's functional sequences.
Steps for powering on and starting the machine.
Procedure for restarting the machine after a stop.
Detailed explanation of the door locking mechanism.
How the machine controls water intake.
Process of dispensing detergent and softener.
How the machine controls water heating.
Motor speed regulation during wash cycles.
Operation of the cool-down phase.
Motor speed regulation during drum distribution.
How the drain valve functions during the cycle.
Motor operation and speed during extraction.
How unbalance is detected and handled.
How the programmer progresses through wash cycles.
Description of automatic unit for card-based machines.
Description of automatic unit for frequency-controlled machines.
Overview of the timer and its role in machine operation.
Guidance on diagnosing and repairing the timer.
Overview of the programmer's electronic components and memory.
Instructions for board removal and chip replacement.
Information about the control transformer.
Overview of the reverser's function and components.
How to check and repair the reverser motor.
Technical details and construction of contactors.
Troubleshooting and repair procedures for contactors.
Overview of relay construction and parts.
Instructions for relay repair and common faults.
Overview of level control function and settings.
How to control and manage water levels.
Procedures for dealing with overfilling situations.
Process for calibrating the level detector.
Steps for setting the zero water level.
Steps for setting the mid water level.
Procedure for determining and entering water levels.
Thermostat specifications and operational overview.
Guidance on replacing the thermostat.
How the unbalance detection system works.
How to check, adjust, and troubleshoot the cutout.
Overview of the safety lock and precautions.
Breakdown of the locking device's operation.
Instructions for repair and troubleshooting.
Specific steps for diagnosing door lock problems.
Instructions for repairing or replacing the door lock unit.
Description of the door lock for FLE MP FC models.
Explanation of how the door lock functions.
Specific steps for diagnosing door lock issues.
Steps to troubleshoot when the door does not unlock.
Steps to troubleshoot when the door does not lock.
Overview of motor setup, types, and mounting.
Details for the frequency control model motors.
Conditions for starting and extraction speed selection.
Guidance on motor issues, noise, and maintenance.
Description of the motor control board and LED indicators.
Diagnosing motor operation and speed issues.
Overview of the speed guard's purpose for FLE/FLE MP.
Overview of the speed guard's purpose for FLE MP FC.
How to replace and adjust the speed guard.
Specifications and operation of the water inlet valve.
Instructions for valve repair and common issues.
Overview of the steam inlet valve's function.
Guidance on steam valve repair and cleaning.
Overview of the drain valve's parts and operation.
Instructions for drain valve repair and spring adjustment.
Overview of the detergent container and its features.
Instructions for replacing the detergent container.
Information on heating elements and their control.
Troubleshooting long heating times and accessing elements.
Steps for replacing heating elements.
Overview of the machine's frame and suspension.
Troubleshooting spin cutout issues and spring attachment.
Information on the time relay's role in spin control.
Steps for replacing the time relay.
To Next Page
