Electrolux NHT8 Short Form Specification

Warewashing
Green&Clean Hood Type
Dishwasher
Front
Top
CWI
=Cold Water inlet
D=Drain
EI=Electrical connection
EQ=Equipotential screw
HWI
=Hot water inlet
WI=Water inlet
XD=Detergent connection
XI=Chemicals inlet
XR=Rinse aid connection
Side
Electric
Supply voltage:
505071 (NHT8)400 V/3N ph/50 Hz
Convertible to:230V 1N~; 230V 3~
Default Installed Power:*9.9 kW
Reducible Installed Power:*6.9 kW
Boiler Heating Elements Power:*9 kW
Boiler Reducible To:*6 kW
Tank heating elements:3 kW
Wash pump size:0.8 kW
Water:
Water supply temperature:10-65°C
Water supply hardness (MAX):14°fH (8°dH)
Inlet Water supply pressure:0.5 - 7 bar
Water consumption per cycle (lt):2
Boiler Capacity (lt):12
Tank Capacity (lt):24
Incoming water line size:G 3/4"
Drain line size:20.5 mm
Key Information:
N° of cycles:3
Duration cycle - High
productivity:*45/84/150 sec.
Duration cycle - ETL Sanitation:*57/84/150 sec.
Racks per hour - High
productivity: *80
Racks per hour - ETL
Sanitation: *63
Dishes per hour - High
productivity: *1440
Dishes per hour - ETL
Sanitation: *1134
Wash temperature - High
productivity:55-65 °C
Wash temperature - ETL
Sanitation:75 °C MIN
Rinse temperature (MIN):84 °C
External dimensions, Height:1549 mm
External dimensions, Width:746 mm
External dimensions, Depth:755 mm
Net weight:106 kg
Shipping weight:118 kg
Shipping volume:1.23 m³
Packaging size
(WxDxH):746x755x1547 mm
Noise level:<68 dBA
* According to market standard, the productivity is declared at an
inlet water supply temperature of 50°C . If the water is supplied at
65°C, the power can be reduced by 3 kW without any loss in
productivity.
NOTE:
If the water supply temperature is less than 50°C, it is necessary to
request higher power to maintain productivity.

Electrolux NHT8 Specifications

General

Brand	Electrolux
Model	NHT8
Category	Dishwasher
Language	English