9
11
3141
13
12
2253
3141
General
Display information
• The clock symbol and two figures are now lit
in the display. The two figures show the time
remaining until the end of the wash.
The two time figures are not displayed im
-
mediately after installation. The relevant
program has to have been used at least once
before the remaining time is displayed.
• Immediately after starting, the colon “
:” flas-
hes in the display. This means that as long as
it is flashing, a new program can be selected
(without losing anything). You still have the
opportunity to change your mind if you have
chosen the wrong program.
• Press
PAUSE/START.
• Select new program
• If the new program is more expensive than
the one you have paid for, the difference ap-
pears in the display. Insert more coins until 00
appears in the display (coin meter machines
only).
• Press
START again once the new program
has been selected.
• The temperature now appears in the display.
For coin meter machines, the price for the se-
lected program is displayed. Insert coins/tokens
corresponding to the displayed value.
11
12
13
To Next Page
Loading...
Need help?
General
