16
User manual
7.4.1 Deliming
When deliming is needed:
Use the special machine cleaning program. If it is not available, contact authorized service personnel to get access
to the program.
It is also possible to use a program with high temperature, 95°C, for deliming. Add a deliming agent, for example citric
acid.
7.5 Drain
If the machine is equipped with a drain pump, check the drain pump at regular basis. Clean if necessary.
Open the door to the drain pump and pull out the hose. Remove the plug (A) to empty the drain into for example a
baking plate or similar.
fig.7388
Pull the clamp upwards and pull out the filter parts. Clean the filter parts and the pump housing with for example a
small brush.
fig.7389
To Next Page
Loading...
