0209
13
3
300 400 500 600 700 800 900 1000
(3) (4) (5) (6) (7) (8) (9) (10)
143 151 158 164 169 174 179 183
01106073
PageNotice Date
OPERATING
HANDBOOK
Complementary instructions for starting up a machine with gas
heating.
The ignition of the burner is delayed by 30 seconds following the start command in order to
allow for the pre-ventilation of the combustion chamber.
The machine will be ready to be used after the following message disappears :
"Error Gas Ignition".
NOTE: the noise at the inter-ignition is not an explosion. It is a normal phenomenon.
Complementary instructions for starting up a machine with
electrical heating.
The typical ironing temperature is 150 to 180 °C (300 °F to 356 °F). You just have to set the
electronic thermostat to the required temperature.
In automatic mode, the ironing temperature is defi ned and managed by the machine.
Complementary instructions for starting up a machine with
steam heating.
Note that the temperature is directly related to the steam pressure (see table bellow).
The typical ironing temperature is 150 to 180 °C (302 °F to 356 °F).
On the contrary of a gas or electric heated machine, for a steam heated machine, you just
have to adjust the ironing speed regardingthe linen and its water retention.
Correspondence between Steam pressure / Temperature
Manometric pres-
sure in bars
Temperature in
°C
3. Method of use
To Next Page
Loading...
Need help?
General
