EN -35-
TECHNICAL DATA PART - 8.
The technical information is situated in the rating plate on the internal side of the appliance
and on the energy label.
Keep the energy label for reference together with the user manual and all other documents
provided with this appliance.
INFORMATION FOR TEST INSTITUTES PART - 9.
Installation and preparation of the appliance for any EcoDesign verification shall be compliant
with EN 62552. Ventilation requirements, recess dimensions and minimum rear clearances
shall be as stated in this User Manual at PART 1. Please contact the manufacturer for any
other further information, including loading plans.
To Next Page
Loading...
