To Next PageTo Next Page
Need help?Do you have a question about the Electrolux TD30x30 and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | TD30x30 |
| Category | Dryer |
| Language | English |
Critical note for continuity and resistance measurements, requiring power disconnection and isolation.
Overview of the dryer's automatic diagnostic system and general error handling.
Checklist for diagnosing overheating errors, focusing on airflow, lint, and gas connections.
Reference listing of error codes E01 through E18 and their corresponding descriptions.
Reference listing of error codes E19 through E28 and their corresponding descriptions.
Diagnostic steps for errors related to a short-circuited input sensor (PT-100).
Diagnostic steps for errors related to a short-circuited output sensor (NTC).
Diagnostic steps for fan motor overheating errors, checking for lint and thermal protection.
Diagnostic steps for drum motor overheating errors, checking for lint and thermal protection.
Diagnostic steps for general machine overheating, checking thermostats and airflow.
Diagnostic steps for errors caused by inconsistent or incorrect parameter setup.
Steps to resolve drying errors occurring with the RMC system when clothes aren't detected as dry.
Steps to resolve drying errors with the Autostop system when clothes aren't detected as dry.
Diagnostic steps and resetting procedures for gas ignition and flame detection errors.
Diagnostic steps for errors where no vacuum is detected within the specified time.
Diagnostic steps for errors where the vacuum sensor is closed at startup (short circuit).
Diagnostic steps for errors related to a disconnected input sensor (PT-100).
Diagnostic steps for errors related to a disconnected output sensor (NTC).
Diagnostic steps for errors when the condensate container is full and the pump is not emptying it.
