Electrolux TRMKTSS2LV84

Need help?

Do you have a question about the Electrolux TRMKTSS2LV84 and is the answer not in the manual?

Summary

Single Trim Kit Dimensions and Overview

Dual Trim Kit Dimensions and Overview (75 & 79 Inch)

Dual Trim Kit Dimensions and Overview (84 Inch)

Before You Begin Dual Trim Kit Installation

Preparatory notes and safety advice before starting dual trim kit installation.

Dual Trim Kit Installation Instructions

Leveling System Installation for Dual Kits

Instructions for installing the leveling system for dual trim kits.

Pairing Kit Installation

Dual Kit Center Trim Support Installation

Instructions for installing the center trim support for dual kits.

Electrolux Side Trim Attachment Setup (TRMKTSS2 LV84)

Power and Water Line Connection

Dual Kit Top Trim Attachment

Dual Kit Top Trim Attachment Steps

Instructions for attaching the top trim components for dual kits.

Electrolux Side Trim Installation (TRMKTSS2 LV84)

Electrolux Side Trim Installation Steps

Specific steps for Electrolux Side Trim installation.

Single Kit Installation Instructions

Leveling System Installation for Single Kits

Instructions for installing the leveling system for single trim kits.

Leveling the Unit in Cabinet

Steps to properly level the installed unit in the cabinet.

Electrolux Side Trim Attachment Setup (TRMKTSS1 LV84)

Frigidaire Side Trim Attachment Setup (TRMKTEZ1 FL79)

Frigidaire Side Trim Installation (TRMKTEZ1 FL79)

Frigidaire Side Trim Installation Steps

Specific steps for Frigidaire Side Trim installation.

Single Kit Top Trim Attachment

Single Kit Top Trim Attachment Steps

Instructions for attaching the top trim components for single kits.

Summary

Single Trim Kit Dimensions and Overview

Dual Trim Kit Dimensions and Overview (75 & 79 Inch)

Dual Trim Kit Dimensions and Overview (84 Inch)

Before You Begin Dual Trim Kit Installation

Preparatory notes and safety advice before starting dual trim kit installation.

Dual Trim Kit Installation Instructions

Leveling System Installation for Dual Kits

Instructions for installing the leveling system for dual trim kits.

Pairing Kit Installation

Dual Kit Center Trim Support Installation

Instructions for installing the center trim support for dual kits.

Electrolux Side Trim Attachment Setup (TRMKTSS2 LV84)

Power and Water Line Connection

Dual Kit Top Trim Attachment

Dual Kit Top Trim Attachment Steps

Instructions for attaching the top trim components for dual kits.

Electrolux Side Trim Installation (TRMKTSS2 LV84)

Electrolux Side Trim Installation Steps

Specific steps for Electrolux Side Trim installation.

Single Kit Installation Instructions

Leveling System Installation for Single Kits

Instructions for installing the leveling system for single trim kits.

Leveling the Unit in Cabinet

Steps to properly level the installed unit in the cabinet.

Electrolux Side Trim Attachment Setup (TRMKTSS1 LV84)

Frigidaire Side Trim Attachment Setup (TRMKTEZ1 FL79)

Frigidaire Side Trim Installation (TRMKTEZ1 FL79)

Frigidaire Side Trim Installation Steps

Specific steps for Frigidaire Side Trim installation.

Single Kit Top Trim Attachment

Single Kit Top Trim Attachment Steps

Instructions for attaching the top trim components for single kits.

This document provides installation instructions for single and dual trim kits designed for all-refrigerator and all-freezer models from Frigidaire Professional and Electrolux. These trim kits are intended to integrate the appliances into cabinetry, offering a built-in look. The instructions cover both 79" and 84" tall cabinet cutouts for single installations, and 75", 79", and 84" tall cabinet cutouts for dual installations.

Function Description:

The trim kits serve to create a seamless, built-in appearance for standalone refrigerators and freezers when installed side-by-side or individually within kitchen cabinetry. They provide aesthetic framing around the appliance, concealing gaps and integrating the unit with the surrounding decor. The kits include various trim pieces for the sides, top, and toe kick, along with hardware for secure installation and leveling. For dual installations, a center trim piece is included to bridge the gap between two units. Some top trim options feature louvers for ventilation, while others are flat.

Important Technical Specifications:

Brands and Kit Numbers:
- Single Trim Kits (79" & 84" Tall Cabinet Cutouts):
  - Frigidaire Professional: TRMKTEZ1FL79 (Single Trim Kit # A16405201)
  - Electrolux: TRMKTSS1LV84 (Single Trim Kit # A19895901)
- Dual Trim Kits (75" & 79" Tall Cabinet Cutouts):
  - Frigidaire: TRMKTEZ2FL75 (Dual Trim Kit # A18643301)
  - Frigidaire: TRMKTEZ2LV79 (Dual Trim Kit # A16405401)
  - Frigidaire: TRMKTEZ2FL79 (Dual Trim Kit # A16404901)
  - Electrolux: TRMKTSS2FL79 (Dual Trim Kit # A16404902)
- Dual Trim Kits (84" Tall Cabinet Cutouts):
  - Electrolux: TRMKTSS2LV84 (Dual Trim Kit # A16405301)
Component Breakdown (Example for Single Trim Kit - Frigidaire Professional TRMKTEZ1FL79):
- Side Trim, RH (A18684901): 1
- Side Trim, LH (A18684902): 1
- Top Trim, Flat RH (A16766503): 1
- Top Trim, Flat LH (A16766505): 1
- Toe Kick, RH (A18684505): 1
- Toe Kick, LH (A18684507): 1
- Leveler Assembly (A17111301): 2
- Hardware Pack U19, Single (A20841303): 1
- Side Trim Attachment (A19036701): 2 (for Electrolux model)
Hardware Pack Components (Example for A20841303):
- Tie-Bar, Top (A18695801): 1
- Screw, Flathead, #8-32 (297142600): 2
- Screw, Round, #8-18 (050149): 4 (or 12 for A20841304)
- Bolt, M5 x 16 (A16955502): 6 (or 14 for A20841301 dual)
- Bolt, ¼-20 (A21188301): 2 (or 4 for A20841301 dual)
- Trim Base Screw (A20706101): 1
- Screw, 10-24 x ¾ (A20632701): 8 (for dual hardware packs)
- Tie Bar, Bottom (A16770801): 2 (for dual hardware packs)
- Center Trim Support (A18685301): 1 (for dual hardware packs)
Cabinet Cutout Dimensions:
- Single Trim Kits (79" Tall):
  - Minimum Width: 35.01"
  - Maximum Width: 35.57"
  - Minimum Height: 79.22"
  - Maximum Height: 80.18"
  - Minimum Depth: 25.25"
  - Minimum Side Clearance: 1.021" (25.9 mm)
- Single Trim Kits (84" Tall):
  - Minimum Width: 36.88"
  - Maximum Width: 37.67"
  - Minimum Height: 83.88"
  - Maximum Height: 84.85"
  - Minimum Depth: 24"
  - Minimum Side Clearance: 0.706" (17.9 mm)
- Dual Trim Kits (75" Tall):
  - Minimum Width: 68.01"
  - Maximum Width: 68.57"
  - Minimum Height: 75.21"
  - Maximum Height: 76.17"
  - Minimum Depth: 25.25"
  - Minimum Side Clearance: 0.896" (22.8 mm)
- Dual Trim Kits (79" Tall):
  - Minimum Width: 68.01"
  - Maximum Width: 68.57"
  - Minimum Height: 79.22"
  - Maximum Height: 80.18"
  - Minimum Depth: 25.25"
  - Minimum Side Clearance: 0.896" (22.8 mm)
- Dual Trim Kits (84" Tall):
  - Minimum Width: 72.88"
  - Maximum Width: 73.67"
  - Minimum Height: 83.88"
  - Maximum Height: 84.85"
  - Minimum Depth: 24"
  - Minimum Side Clearance: 0.706" (17.9 mm)
Electrical Requirements: Two separate dedicated grounding-type duplex wall outlets for the freezer and refrigerator are required, as specified in the Use & Care Manual. For new construction, a 25.25" cabinet depth dimension is recommended for recessed electrical outlets and water shutoff valve.

Usage Features:

Leveling System: The kits include leveler assemblies that attach to the appliance's base. These are crucial for ensuring the unit is level front-to-back and side-to-side, and that all wheels are touching the floor, which is essential for proper door alignment and trim installation. The levelers can be adjusted using a 5/16" nut driver, flathead screwdriver, or 3/8" socket wrench.
Tie-Bar System: Top and bottom tie-bars are used to secure the units together in dual installations and to the cabinetry, providing structural integrity and ensuring consistent spacing.
Side Trim Attachment: Specific brackets and screws are provided to attach the side trims securely to the cabinet cut-out edges, with rectangular slots allowing for precise alignment.
Top Trim Options: Both flat and louvered top trims are available, catering to different aesthetic preferences and ventilation needs. Louvered trims are typically used for models requiring more airflow.
Toe Kick Integration: Toe kicks are designed to fit over the leveler assembly slots and attach via magnets to the leveler assembly bolts, ensuring a flush and vertical resting position.
Heater Installation (for pairing kits): For dual installations, heaters are adhered to the sides of the units to prevent condensation. Proper placement (lower right of left unit, upper left of right unit) and alignment of harnesses are critical.
Power Supply Management: Clips are provided to manage excess power cords, keeping them away from the floor and preventing damage when units are pushed into place. The power supply for the heaters (if applicable) is designed to fit within the cabinet cutout and reach the power outlet.

Maintenance Features:

Cleaning Instructions: Before installation, it's recommended to clean both sides of the refrigerator and freezer. Stainless steel surfaces should be cleaned with non-abrasive soapy water and a dishcloth, rinsed with clean water, and dried with a soft cloth. Stubborn spots can be treated with an ammonia-soaked paper towel. Chloride-based cleaners should be avoided on stainless steel. Other cabinet parts can be cleaned with warm water and mild liquid detergent.
Accessibility for Service: The design allows for the unit to be rolled out from the cabinetry for accessibility, which is important for future maintenance or adjustments.
Adjustable Components: The leveling system and slotted brackets for tie-bars allow for fine adjustments to ensure proper alignment and fit, which can be re-adjusted if needed over time.