To Next PageTo Next Page
Need help?Do you have a question about the Electrolux ERF2000 and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | ERF2000 |
| Category | Kitchen Appliance Accessories |
| Language | English |
Diagram and key for the Power Board (PB) components.
Diagram and key for the ALFA 2C display board components.
Diagram and key for the BI 1C display board components.
Diagram and key for the BI 2C display board components.
Diagram and key for the DELTA 2C display board components.
Diagram and key for the D3 1C display board components.
Diagram and key for the ALFA 1C display board components.
How to turn the appliance compartments on and off using the ON/OFF button.
How to adjust the freezer temperature using buttons, range, and stabilization.
How the freezer compressor is controlled by the air sensor.
Activation and deactivation of the Super function for fast freezing.
How the freezer thermometer displays temperature, stabilization, and update speed.
How to adjust the refrigerator temperature, range, and stabilization.
How the refrigerator compressor is controlled by sensors and balancing heater.
How to activate and deactivate the Holiday function for the refrigerator.
How to activate and deactivate the Super Cooling function for the refrigerator.
How the refrigerator thermometer displays temperature, stabilization, and update speed.
How to activate and deactivate Demo Mode and its effects.
How the freezer temperature alarm is activated, indicated, and reset.
How the optional refrigerator temperature alarm activates.
How the optional door open alarm is activated using a sensor or switch.
How an 'E' display indicates incompatibility between electronic boards.
How a 'P' display indicates an EEPROM error.
What the refrigerator display shows for faulty air or evaporator sensors.
What the freezer display shows for a faulty air sensor.
Explains various display symbols for the refrigerator compartment.
Symbols 'E' and 'P' indicate board incompatibility and EEPROM errors in the refrigerator.
Explains various display symbols for the freezer compartment.
Symbols 'E' and 'P' indicate board incompatibility and EEPROM errors in the freezer.
How to decrease the freezer temperature area by 3°C.
How to activate a program to check LEDs and loads.
How to display EEPROM code, software version, and failure codes.
How the system handles EEPROM reading/writing errors and loads default parameters.
A table summarizing special functions, their activation, and interruption.
Functions specific to 4-star models, including fast freezing and balancing heater.
Differences between Dynamic Cooler and traditional models, including fan operation.
How door opening affects fan and compressor in DME appliances.
Document revision history.
