ERF2000 Functions of the electronic boards Rev. 01 23/30
6. DISPLAY SYMBOLS
Refrigerator
"0" – "39" steady light: It indicates the average temperature in the refrigerator in
appliances with double display.
"0" – "9" steady light: It indicates the average temperature in the refrigerator in
appliances with single display.
"2" – "8" flashing light: It appears during the temperature setting operation. It disappears 5
seconds from the end of the temperature setting.
"1" – "9" flashing light: It appears during the temperature setting operation. It disappears 5
seconds after the end of the temperature setting (some Electrolux
models).
"-" steady light: It indicates that the refrigerator temperature is higher than 9°C and
the display is single.
"0" steady light: It indicates that the refrigerator temperature is between -2°C and
0°C.
"-" flashing light: It indicates that the refrigerator temperature is lower than -2°C.
"H" steady light: It indicates the Holiday function.
"A" or “SP” steady light: It indicates the super cooling function.
steady light: Air sensor fault.
steady light: Evaporator sensor faulty.
“E” steady light: It indicates incompatibility between the electronic boards.
Solution: check the part nos. of the electronic boards.
“P” steady light: It indicates an Eeprom error (wrong or not readable parameters).
Solution: replace both electronic boards (power and display).
To Next Page
Loading...
