Electrolux TWINCLEAN - Getting the Best Results; Using Max In Nozzles

10
Getting the best results
Hard oors and carpets: The Max In, Max In Turbo
andMaxInmotorisedoornozzles(5)detectthetype
of surface being vacuumed. The nozzle with the pedal is
set to the type of surface to be vacuumed: Position 1 for
carpets(17)andposition2forhardoors(18).
Crevices, corners, etc.: Usethecrevicenozzle(8).
Upholstered furniture: Usetheupholsterynozzle(9).
Curtains, lightweight fabrics, etc.: Use the upholstery
nozzle(9).Thesuctionpowercanbereducedbypressing
the Max-Min button on the vacuum cleaner or the Min
button on the remote control.
Frames, bookshelves, etc.: Usethedustingbrush(10).
Using Max In nozzles
Max In, Max In Turbo and Max In motorised oor nozzles,
are ideal for both hard oors and carpets. The Max In
motorized nozzle receives power via the tube and hose,
and no additional electrical connections are needed. A
blue light on the nozzle indicates that the brush roller is
turning. If anything should become lodged in the brush
roller, the light turns o.
Note: Do not use the Max In Turbo or Max In motorised
nozzles on fur rugs, rugs with long fringes or pile depths
exceeding 15 mm. To avoid damaging the carpet, do not let
the nozzle stay in one place when the brush is rotating. Do
not pass the nozzle over electrical cords, and be sure to switch
o the vacuum cleaner immediately after use.
English
8
17 18
5
9 10
1180066-21.indd 10 2/4/08 4:47:34 PM