Service
Manual
12. Troubleshooting
12
37
438 9152-31/06
05.03
41E
The motor controller indicates an error in the thermal protection
circuits of the motor.
If the power is on, be very careful when working on the machine.
Switch off the machine and wait for about 30 seconds. Then switch on the
machine again and start a programme.
If the error returns, the motor controller is probably defective.
W365H, W375H up to machine No. –520/19486 and 520/19549-22806,
W3105H up to machine No. –595/9040,
W3130H, W3180H up to machine No. –725/7908, W3240H up to machine No. –795/3769
To Next Page