17
23
23. Programme unit
438 9149-81/06
04.03
Service
Manual
When programming time, the clock symbol is lit
and temperature the thermometer is lit.
There is possible to decide from the factory for
each wash module (prerinse, prewash, main
wash and rinse), if the time in the wash module
shall remain unchanged or not, despite of a time
change done.
Reset all changes
It is possible to reset all changes made.
•Press service button to enter the service
mode.
•Press service button again and keep it
pressed for at least 10 seconds.
The display will now show EP which
means that the reset is completed.
Programmable functions
Service code 83
AWS (Automatic Weight System) can be turned
off by changing from 1:83 TO 0:83.
Service vode 84
Heated to non-heated. Thermostop can be
turned off be changing from 1:84 to 0:84.
Service code 85
Fault indication for "No heating" can be
deactivated by changing from 1:85 to 0:85.
W365H - Conversion table, water level
Scale units Quantity of Water level *
water (litres) (mm)
16 5 25
22 7 45
29 10 69
30 10.5 72
31 11 76
33 12 82
35 13 88
36 13.4 91
40 15 102
46 18 121
50 20 134
54 22 146
61 26 167
67 30 186
90 40.7 258
105 47.6 297 overfilling
level
* Distance above bottom of inner drum.
W375H - Conversion table, water level
Scale units Quantity of Water level *
water (litres) (mm)
15 5 22
22 8.2 45
24 9 52
26 10 59
30 12 71
31 12.5 75
34 14 84
36 15 90
43 19 113
46 21 125
48 22 128
54 25 144
61 30 170
70 35 195
90 47.1 255
110 56 300 overfilling
level
* Distance above bottom of inner drum.
To Next Page