2. Remove the cardboard top.
3. Remove the polystyrene packaging
materials.
4. Remove the internal film.
5. Open the door. Remove the polystyr-
ene piece from the door seal and all the
items from the drum.
6. Put one of the polystyrene packaging
elements on the floor behind the appli-
ance. Carefully put down the appliance
with the rear side on it. Make sure not
to damage the hoses.
7. Remove the polystyrene protection
from the bottom.
1
2
8. Pull up the appliance in vertical posi-
tion.
9. Remove the power supply cable and
the drain hose from the hose holders.
10. Remove the three bolts. Use the key
supplied with the appliance.
22 electrolux
To Next Page
Loading...
