1. Open the wine cabinet door
completely.
2. Pull the shelf out.
3. Grab the shelf in the middle, lift it up
slightly and take it out of the wine
cabinet.
Installing shelves
To put the shelf back into its initial
position:
1. Pull out the shelf's rails completely.
2. Position the shelf's rear mounts on
the rails, so they are engaged on
both sides.
3. Align the guides in the front.
4. Press the back of the shelf down
firmly to check if it is placed and
engaged correctly on the rails and
push it back into the appliance.
CAUTION!
Before placing any wine
bottles on the shelves, make
sure they are properly
engaged on the rails.
Check for the possible wrong shelf
positioning:
Use the wooden shelves
only to store bottles.
ENGLISH 71
To Next Page
Loading...
