Electrolux WRH605I - Recirculating Vent Installation

OPERATION GUIDE & INSTALLATION INSTRUCTIONS
INSTALLATION USING THE SUPPLIED DRAWER FASCIA
FOR MODELS: WRH605I WRH608I WRH908I REHR6 REHR9 RRE634 RRE934
Standard ducted installation calls for a door extension of 130mm
whether the client opts to use the supplied draw fascia or a custom
fascia of the same dimensions as that supplied.
RECIRCULATING VENT INSTALLATION
Note: If the Rangehood is to be vented using the recirculating vent rather
than standard ducting, the supplied drawer fascia is not to be used
and must be replaced with a client specifi c custom fascia**.
The custom drawer fascia must be a minimum of 70mm deep as air
expelled through the recirculating vent must be defl ected upwards.
INSTALLATION INSTRUCTIONS
130
40
3
101
70
3
RECIRCULATE
EXHAUST
RECIRCULATE
EXHAUST
Setting of circulation air door - single fan models
Setting of circulation air doors - dual fan models
P4
13427_Rangehood_Electrolux.indd 5
Unscrew and remove
cover from
recirculating vent
● ● ● ● ● ●
FOR MODELS: ( WRH608I WRH908I RRE634 RRE934 )** (RRE635 already fitted with 70mm front panel)
● ● ● ●