OPERATION GUIDE & INSTALLATION INSTRUCTIONS
P6
OPERATION
MODELS: WRH605I* REHR6* REHR9*
The operation of the light and the two-speed fan are controlled by the drawer action. (see diagram)
IMPORTANT: The Edison Screw lamps may have come loose during transportation.
Ensure that lamps are tightened firmly into the socket before power is applied.
MODELS: WRH608I* WRH908I* RRE634* RRE635* RRE934*
The operation of the lights and the three speed fans are controlled by the drawer action. (see diagram)
OPERATION & MAINTENANCE
MAINS SWITCH
OFF
TO REPLACE LIGHT GLOBES
1. Open drawer and remove filter.
2. Turn mains switch off before removing lamp.
Replace with 40W maximum E14 candle lamp. Depending on model will require 1 or 2 globes.
13427_Rangehood_Electrolux.indd 7
To Next Page