Electrolux WT30 - User Manual

Electrolux Dishwashing
Undercounter Dishwashers WT30
The Electrolux Dishwashing range is produced for customers with the highest conceivable demands for good efficiency,
economy and ergonomics for dishwashing operation. The product range comprises of glasswashers, undercounter
dishwashers, hood type dishwashers, rack type dishwashers, flight type dishwashers and pot and pan washers.
The undercounter dishwasher WT30 range consists of 7 units equipped with or without drain pump and thermometers,
with a capacity of 30 baskets per hour.
Model 502600
EASY TO INSTALL AND MAINTAIN
• The WT30 requires 6,85 kW or 5,35
kW , according to the heating
elements installed inside the boiler.
• Equipped with drain pump if
required to facilitate installation.
• Rinse booster pump available to be
installed on site.
• Required space the same as a
conventional domestic dishwasher.
• Simple service from the front.
EASY TO CLEAN
• WT30 has smooth surfaces and a
fully pressed wash tank with rounded
corners to facilitate cleaning.
• Wash/rinse arms and filter easy to
remove.
• The external panels are in AISI 304
stainless steel for easier cleaning and
hygienic reasons.
• Counterbalanced door.
EASY TO USE
• Built-in rinse water heater to
in-crease the temperature of the final
rinse water. Final rinse only starts
when the correct temperature has
been reached.
• Built-in rinse aid dispenser and box
for a perfect rinsing result.
• Simple control panel, with wash and
rinse thermometers if required.
• Three dishwashing programs, one
for lightly soiled tableware, one for
normally soiled items and a third
program for heavy soiled items.
• One model, WT30DTBR, with
thermal disinfection thanks to the 30
sec. rinsing cycle at 85°C.
CONSTRUCTION FEATURES
• Double skinned construction.
• All models finished in top quality
materials to aid durability.
• Completely closed on the reverse
by a cover plate.
• In compliance with H
requirements.
• Wash/rinse arms and nozzles in
stainless steel.
EASY ON THE ENVIRONMENT
• 98% recyclable by weight.
• CFC free packaging.
• Low noise level
• Developed and produced in ISO
9001 and ISO 14001 certified factory.

Summary

Easy Installation and Maintenance

Power and Water Requirements

The WT30 requires 6.85 kW or 5.35 kW depending on installed heating elements. Rinse booster pump is available.

Installation Space and Service

Requires space similar to a domestic dishwasher and offers simple service access from the front.

Ease of Cleaning

Hygienic Design Features

Features smooth surfaces, a fully pressed wash tank with rounded corners, and easy-to-remove wash/rinse arms.

Material for Durability

External panels are AISI 304 stainless steel for easier cleaning and hygienic reasons, with a counterbalanced door.

Ease of Use

Rinse System Features

Built-in rinse water heater for optimal temperature and a rinse aid dispenser for perfect rinsing results.

Washing Programs and Disinfection

Three programs for different soil levels, with an option for thermal disinfection via a 30-sec. rinse cycle at 85°C.

Construction and Environmental Features

Build Quality and Compliance

Double-skinned construction, high-quality materials, CE compliance, and stainless steel wash/rinse arms.

Environmental Impact

98% recyclable by weight, CFC-free packaging, low noise level, and produced in ISO certified factories.

Electrolux WT30 Specifications

General

Brand	Electrolux
Model	WT30
Category	Dishwasher
Language	English