Electrolux Z2100 - Troubleshooting; Vacuum Cleaner Does Not Start; Reduction of Suction Capacity; Overheating

7
Troubleshooting
In case of malfunction, check for the following probable reasons. Make the necessary
corrections which may be performed at home. If the problem persists, consult the Electrolux
Authorized Service Centre.
PROBLEM POSSIBLES CAUSES CORRECTIONS
The vacuum cleaner The plug is not properly Check the plug connection
does not start. connected to the socket. or try another socket.
Thermal protector Press the ON/OFF button
activated due to motor and wait 30 minutes for the
high temperature. motor to cool off.
Reduction of Suction hose blocked. Clean the hose.
suction capacity.
Nozzle blocked. Clean the nozzle.
Full disposable Replace the disposable
dust bag. dust bag.
Damaged or broken hose. Change the hose.
Over heating Dust bag is full. Replace the disposable
dust bag.