Need help?Do you have a question about the Electron Dynamics TC M series and is the answer not in the manual?
General| Enclosure Rating | IP20 |
|---|---|
| Control Modes | PID, Manual |
| Sensor Type | Thermocouples (J, K, T) |
| Output | Analog (0-10V, 4-20mA), Relay |
| Control Output | Relay, Analog |
| Control Algorithm | PID |
| Display | LCD |
| Power Supply | 110-240V AC |
Covers heatsink sizing and the importance of thermal conduction for stability.
Advises on Peltier size calculation and managing drive limits to avoid damage and inefficiency.
Lists factors for faster settling, improved accuracy, and reduced thermal load.
Explains Proportional, Integral, and Derivative terms and their effects on control accuracy and stability.
Discusses methods like Relay Feedback and Ziegler-Nichols for PID parameter tuning.
Details the auto-tuning function using relay feedback for easier PID parameter setup.
Explains the open-loop method for calculating PID terms using process dead time and time constant.
Describes the closed-loop method for PID tuning by finding oscillation gain and period.
Configures minimum/maximum alarms and temperature OK limits, including GUI-specific maximums.
Details power supply, output ratings, and control methods.
Covers sensor types, set point setting, and alarm configurations.
To Next Page