13
Armed:
The state between arming and disarming.
Upon detection, the system sends alarms and
activates the siren.
Authorization level:
Assigned to each user code.
Determines which alarm control panel activities can
be performed by the different users.
Away key:
Completely arms the system (perimeter
and interior), which can be programmed as a one
touch key operation.
Bypass zone x:
Tells the system to ignore signals
from the designated zone (x).
Clear log:
The user may choose to clear the events
recorded.
Disarmed:
System is not armed and will neither send
nor sound an alarm, except for an event from a 24
hour zone.
Duress user code:
Should a user have to forcefully
perform a system operation, keying in this code will
send an event message to the central station,
notifying them of a duress situation.
Emergency keys:
These keys, which are available for
police, fire and emergency inform the central station
of an emergency situation.
Entry delay:
A delay set for a zone which allows the
user enough time to enter the armed area and disarm
the system, without generating an alarm.
Event log:
Records the events that the system has
undergone.
Exit delay:
A delay set for a zone which allows the
user enough time to exit the armed area, without
generating an alarm.
Follow me:
Typically the 4th telephone number. This
number can be programmed to send a message to
wherever the user is, notifying them of an event.
Immediate arm:
This arms the system immediately,
without allowing for both exit and delays. This is done
by pressing the “
4
” after arming.
can send emergency codes.
Menu:
The menu lists all of the operations available in
the Summit 3208GLD. This is available only on the
LCD keypad by pressing the “MENU/NEXT” key.
Partitioned mode:
Partitioned mode divides the
system into up to 4 sub-systems and control keypad
user access, as well as sub-system zone assignment.
Power Indicator:
Indicates the status of the primary
and backup power supplies to the system.
Select key:
Using this key enables the selection of a
menu option (LCD keypad only) or command code
sequence.
Set time:
Allows the time and date to be set.
Stay key:
Pressing this key arms the perimeter only
(stay mode).
Sub-system:
A system out of the 4 available in
partitioned mode.
Unbypass zone x:
Restores the zone to protection
mode.
Unpartitioned:
The Summit 3208GLD is not set to
work with sub-systems.
User codes:
A user code allows the user to perform
the functions of the system. User codes are assigned
levels, which effect their functionality and can be
assigned to the different sub-systems. Up to 15 user
codes can be assigned to the system.
View Log:
Selecting this option allows the user to
view a record of the last 100 events the system has
undergone.
Zone descriptor:
A name assigned, by the user, to a
zone. Displayed on the LCD keypad with all
messages relating to the specified zone.
Zones:
A detector (or several detectors) connected to
a control panel
To Next Page
Loading...
