Electronics Line 3208GLD - System Status and Zone Indicators; System Status Display Information; Zone Status Display Interpretation

5
System not ready to arm due to open
perimeter zones:
SYSTEM NOT RDY
(OPEN ZONES)
System armed, exit delay counting: SYSTEM 1 ARMED
XX SEC TO EXIT!
System ready for perimeter arming (interior
zones open).
SYSTEM 1 READY
FOR STAY ARMING
System ready for perimeter arming with
perimeter bypassed zones.
SYSTEM 1 READY
STAY (BYPASSED)
System armed, exit delay ended – system is
fully armed:
SYSTEM 1 ARMED
System Perimeter armed, exit delay ended
(STAY pressed):
SYSTEM 1 ARMED/P
System armed, immediate mode: SYSTEM 1 ARMED
IMMEDIATE
Zone Status Display
Zone status will only be displayed if detailed
display is selected:
ZONE 1 OPEN
BEDROOM
-or- ZONE 3 BYPASSED
FRONT DOOR
-or- ZONE 4 TROUBLED
KITCHEN
Zone 4, bedroom, is in alarm (appears only if
an alarm has taken place):
ZONE 04 IN ALARM
BEDROOM
System Status Display
System AC Power was lost: SYSTEM AC LOSS
System Backup battery is too low (under
10.8V):
SYSTEM LOW BATT
Communication or telephone supervision has
failed:
TELEPHONE COMM.
FAILURE
Time and Date display (Set Time and Date by
SELECT, 4, 1 and Passcode):
Note: This display scrolls every few seconds.
THU , 28 JUL 94
12 : 37 PM
In addition, both the LED and LCD keypads are equipped with Armed and Power
indicators.