9
Designating a Follow Me Contact Number
Designate the cell phone number of a system user to receive SMS
Follow Me notifications of system events.
To designate a Follow Me number:
1. At the control panel press , then enter the master code
(default is 1234) or the engineer code (default is 1111).
2. Use to scroll to 5. FOLLOW ME #, then press .
3. Enter the area code and number, and then press .
NOTE: To edit the number, scroll to 5. FOLLOW ME #, then
press . Use to move between digits, and
press to delete a digit.
To Next Page
Loading...
