Electrothermal IA 9200 User Manual

IA9000 SERIES
Digital Melting Point
Apparatus
Operating and
Safety Instructions

Electrothermal IA 9200 Specifications

General

Brand	Electrothermal
Model	IA 9200
Category	Melting Machines
Language	English

Summary

2 SAFETY INFORMATION

3 INSTALLATION INSTRUCTIONS

4 PRINCIPLES OF OPERATION

4.1 CALIBRATION

4.2 IA 9100 OPERATION

4.2.2 Set-Up

4.2.3 Connections.

4.2.4 Start up.

4.2.5 Prepare a Sample

How to prepare and insert samples into the capillary tubes for analysis.

4.2.6 Enter the 'set Point'

Instructions for setting the target temperature for sample analysis.

4.2.7 GOTO 'Set Point'

How to confirm the 'Set Point' and monitor temperature stabilization.

4.2.8 Initiate Ramp.

How to start the temperature ramp for sample analysis.

4.2.9 Analysis and Storage of Melt points.

Process for observing melt stages and storing temperature data in memory.

4.2.10 Recall of Information.

How to review stored melt point data from the instrument's memory.

4.2.11 To Carry out further melt

Steps to perform subsequent analyses after a previous measurement.

4.3 IA 9200 OPERATION

4.3.2 Set-Up

4.3.3 Connections.

4.3.4 Initial Set-Up.

Setting the Clock and Print Parameters.

4.3.5 Normal Start-up

4.3.6 Prepare a Sample

4.3.7 Enter the 'Set Point'

Instructions for setting the target temperature for sample analysis on the IA9200.

4.3.8 GOTO 'Set-Point'

4.3.9 Select Ramp Rate.

Methods for selecting the desired temperature ramp rate for the IA9200.

4.3.10 Analysis and Storage of Melt points.

Process for observing melt stages and storing temperature data in memory for IA9200.

4.3.11 Recall and processing of Information.

4.3.12 To carry out a further melt.

4.4 IA 9300 OPERATION

4.4.1 Mode of Operation.

5 TECHNICAL SPECIFICATION

6 EQUIPMENT MAINTENANCE

7 SERVICE INFORMATION