Need help?Do you have a question about the Electrothermal IA9300 and is the answer not in the manual?
Follow lab practices, use fume hoods, ensure proper surface, avoid leaning, keep away flammables, handle spills correctly.
Equipment is Class II. Operation requires indoor use within specific temperature and humidity ranges with proper mains connection.
Describes setting a target temperature, heating, ramping, observation, and recording melt points.
Recommends using onset of melt observations against certified reference materials for calibration.
Calibration is required annually or if performance is suspected, using a kit or by returning to the dealer.
Steps to check if the unit is still in calibration by performing melts with standard chemicals.
Detailed instructions on how to perform re-calibration, involving power disconnection and adjustment.
Details the supported AC mains voltage range and restrictions on DC supply or voltage regulators.
Guide for switching on the unit, observing indicators, and the importance of a 30-minute stabilization period.
Step-by-step guide to entering the target 'Set Point' temperature using arrow keys.
How to focus the sample and store observed melt point temperatures in memory.
Details the supported AC mains voltage range and restrictions on DC supply or voltage regulators.
Detailed steps for entering date, time, and configuring printer settings (e.g., EPSON, RS232-C).
Procedure for normal startup, including switching on and stabilization.
Step-by-step guide to entering the target 'Set Point' temperature using the keypad.
Details two methods for selecting ramp rates, including preset and custom values.
Compares general features like processor, keypad, memory, and ports across IA9100, IA9200, IA9300.
Details electrical specifications like oven wattage, total power, control method, and temperature range.
Crucial warnings about unplugging the unit, using qualified personnel, and avoiding contamination.
Outlines periodic electrical safety testing and regular inspection for damage.
Defines the Responsible Body's duty for decontamination and verifying cleaning methods.
A strict warning against using solvents for cleaning any part of the apparatus.
General| Brand | Electrothermal |
|---|---|
| Model | IA9300 |
| Category | Melting Machines |
| Language | English |
To Next Page
