Need help?Do you have a question about the EleCycles OMT-M3 and is the answer not in the manual?
Provides external dimensions and mounting specifications for the display unit in millimeters.
Illustrates the wiring connections and defines the function of each wire.
Provides instructions for mounting the display on the handlebar and connecting it.
Details real-time, maximum, and average speed display capabilities.
Details how to turn the display and controller on and off using the power button.
Instructions on how to enter the parameter setting mode using button combinations.
Describes how to change values and quit parameter setting mode.
Allows adjustment of backlight brightness across 3 levels.
Allows selection of wheel size in inches, with 0.1 inch increments.
Allows setting a speed limit from 0 to 100 Km/h; 100 means no limit.
Sets the maximum current limit for the controller (1-20A).
Configures low voltage protection for the controller.
Allows resetting the ODO distance to zero by long-pressing a button.
Resets all parameters to default values, except ODO distance.
Lists error codes and their corresponding significations, like Normal or Low Battery.
To Next Page
General